Used for: Tuning the 13BT engine commonly found in the Mazda Series 6 RX7.
Link ECU | "G4X RX7Link RX7S6X (S6)"
Designed for: Mazda RX7 Series 6 | Engine Code: 13BT.
Full list of suitable applications below.
The G4X RX7Link RX7S6X is a Plug-In ECU developed by Link Engine Management, designed to maximise the potential of your car.
Link's RX7S6X ECU fits directly into the factory location, requires no alteration of the factory wiring loom / harness, and is designed to be simple to install.
This ECU works for manual transmissions only.
RX7Link RX7S6X supports the following vehicles: Mazda RX7 Series 6 | FD3S
Note: This ECU will support N/A [Naturally Aspirated], parallel twin or single turbo configurations. It does not support sequential control of the stock twin turbos.
Features | "G4X RX7Link RX7S6X"
Expansion Connector 1:
S.GND | Ground Sensor Only
+5V | Low Current +5V Supply
Volt 5 | Analog 0-5V Input
Volt 6 | Analog 0-5V Input
DI 6 | Digital Input
G4X Plug-In Features:
Up to 6D Fuel & Ignition Mapping
Precision Closed Loop Cam Control (Four Cam | Independent Control)
Link Plug in ECU - Mazda RX7 Series 6 13BT (RX7S6X)
Used for: Tuning the 13BT engine commonly found in the Mazda Series 6 RX7.
Link ECU | "G4X RX7Link RX7S6X (S6)"
Designed for: Mazda RX7 Series 6 | Engine Code: 13BT.
Full list of suitable applications below.
The G4X RX7Link RX7S6X is a Plug-In ECU developed by Link Engine Management, designed to maximise the potential of your car.
Link's RX7S6X ECU fits directly into the factory location, requires no alteration of the factory wiring loom / harness, and is designed to be simple to install.
This ECU works for manual transmissions only.
RX7Link RX7S6X supports the following vehicles: Mazda RX7 Series 6 | FD3S
Note: This ECU will support N/A [Naturally Aspirated], parallel twin or single turbo configurations. It does not support sequential control of the stock twin turbos.
Features | "G4X RX7Link RX7S6X"
Expansion Connector 1:
S.GND | Ground Sensor Only
+5V | Low Current +5V Supply
Volt 5 | Analog 0-5V Input
Volt 6 | Analog 0-5V Input
DI 6 | Digital Input
G4X Plug-In Features:
Up to 6D Fuel & Ignition Mapping
Precision Closed Loop Cam Control (Four Cam | Independent Control)