Link ECU | G4X MR2Link V.1 | TST185X | Plug - In

Link Engine Management

( 221-4000 )

£1,074.00

Used for: Tuning the 3GSTE engine commonly found in the Toyota '89+ MR2 / Celica.

  Buy NOW

Link Engine Management Logo | LINK ECUS IN ESSEX

Link ECU | "G4X MR2Link V.1 TST185X"

  • Designed for: 3GSTE Engine.
    Full list of suitable applications below.
  • The G4X MR2Link TST185X is a Plug-In ECU developed by Link Engine Management, designed to maximise the potential of your car.
  • Link's TST185X fits directly into the factory enclosure, requires no alteration of the factory wiring loom / harness [for models listed], and is designed to be simple to install.
  • This ECU works for manual transmissions only | most factory features are still supported.
  • A Link Air Temp Sensor is highly recommended for use with this ECU.
  • MR2Link V.1 TST185X Supports the following vehicles:
    Toyota MR2 (SW20) [1989 - 1992]
    Toyota Celica ST185 [1989 - 1993] | Carlos Sainz S.E NOT compatible.

Features | "G4X MR2Link TST185X"

I/O Expansion Options | Inputs / Outputs:

  • GND | Sensor Ground Only
  • +5V OUT | Low Current +5V Supply
  • DI 5 | Digital Input for switching functions
  • DI 6 | Digital Input for switching functions
  • DI 4 | Digital Input for switching functions 
  • An Volt 4 | Analog 0-5V Input
  • An Volt 5 | Analog 0-5V Input
  • An Volt 6 | Analog 0-5V Input

Ignition Expansion:

  • An ignition expansion is provided, allowing you to convert to a Direct Spark Ignition System. Alternatively, these outputs can be used to drive auxiliary devices. The following pinout describes the available connections:
    1 | Ignition 1
    2 | Ignition 2
    3 | Ignition 3
    4 | Ignition 4

     

G4X Plug-In Features:

  • Up to 6D Fuel & Ignition Mapping
  • Precision Closed Loop Cam Control (Four Cam | Independent Control)
  • Sequential Fuel Delivery
  • Digital Triggering, all OEM Patterns
  • 5D Boost Control w/ Three (3) Switchable Tables
  • OEM Idle Hardware Supported
  • Motorsport features; Anti-Lag, Launch Control, Flat Shift
  • Continuous Barometric Correction [on board]
  • CAN Port
  • QuickTune - Automated Fuel Tuning
  • Individual Cylinder Correction
  • USB Tuning Cable included
  • Records into On-Board memory
  • Gear Compensations for Spark, Boost and Fuel
  • More...

Full Specification [Link ECU] 


Link ECU Supply, Installation & Calibration:

  • Redline Tuning can supply, install & calibrate both the Link G4X MR2Link V1 TST185X ECU or any other Link Engine Management Product currently available in Essex, London and the South East of England.

Contact Redline Tuning 


Important Notes:

  • Please double check / cross reference your existing ECU's pinout with the images we have provided, to ensure connections are correct.

redline tuning logo

0
Shopping Basket
X