Link ECU | G4X MonsoonX | Wire - In

Link Engine Management

( 127-4000 )


Used as: A powerful aftermarket ECU for naturally aspirated engines, or turbocharged engines alike.

  Out of Stock

Link Engine Management Logo | LINK ECUS IN ESSEX

Link ECU | "G4X FuryX"

  • The Link G4X MonsoonX ECU is one of Link Engine Management's more powerful ECU modules. It's been upgraded to provide 512MB of data logging at 32bit using up to 250 channels, each limited to 1kHz oer channel, with a max. of 100 kSamples/sec.
  • It has all the tuning capbilities of the AtomX module, but you can choose to run features such as launch control, anti-lag, VVT control and closed loop boost control.
  • It can be used for up to eight (8) cylinders using bath fire, and can control up to two (2) rotors or four (4) cylinders with sequential injection and direct spark. An ideal choice for naturally aspirated engines, or turbocharged engines that just need a retune and some added features...
  • Note: Requires A loom.

Features | "G4X MonsoonX"


  • 4 x Digital Inputs
  • 2 x Temperature Inputs
  • 4 x Analog Inputs
  • 2 x Trigger Inputs
  • 1 x Knock Input(s)
  • 1 x Onboard 4 Bar MAP Sensor


  • 4 x Injector Drives
  • 4 x Ignition Drivers
  • 6 x Auxiliary Outputs*
  • +5V Sensor Power Supply

*Unused ignition drivers can be used as additional AUX outputs.


  • 1 x CAN Bus
  • 1 x USB Tuning Connection
  • Upgraded Communications Chip (4x faster than G4+)

Advanced Features [Not found on the AtomX]:

  • Anti-lag, rolling anti-lag & launch control.
  • Up to 2 fully variable closed loop VVT cams.

Full Specification [Link ECU] 

Link ECU Supply, Installation & Calibration:

  • Redline Tuning can supply, install & calibrate both the Link G4X MonsoonX ECU or any other Link Engine Management Product currently available in Essex, London and the South East of England.

Contact Redline Tuning 

Important Notes:

  • This product requires an "A" Loom.
  • Please double check / cross reference your existing ECU's pinout with the images we have provided, to ensure connections are correct.

redline tuning logo

Used for: Custom wiring jobs utilising Link Wire - In ECU's.
Shopping Basket