Ignition Coil Conversion Kit [R8] | For: Skyline GTR RB26

Redline Tuning

( RB26R8 )


Used for: An Aftermarket upgrade for the RB26's ignition system, featuring Audi R8 Coil Packs & custom components.

  Add to basket
We offer:
We offer payment cardsWe offer PayPal


 Engine Management and Tuning in Essex and South East England


Ignition Coil Conversion Kit [R8] | For: Skyline GTR RB26 | Custom Made by Redline Tunin





  • Suitable applications:
    Nissan Skyline GTR [RB26 Engine]

  • Redline Tuning's Coil Conversion Kit for the Skyline GTR RB26 uses genuine Audi R8 Coil Packs, a custom made aluminium mounting frame & a custom ignition wiring harness, serving as an upgrade from outdated ignition components commonly found on the Skyline GTR RB26's engine.
  • Being one of the UK's leading high performance Skyline tuners, we face a near-weekly challenge of insufficient spark energy created by stock RB26 ignition components. We regularly see failures from degrading ignition coils, faulty ignition amps and old & brittle wiring harnesses.
  • Our solution was to create a modernised system using Audi R8 coil packs, designed to be easily removable for spark plug changes. We've also created a custom aluminium frame, located away from the cylinder head to avoid unnecessary heat build up, and a custom wiring harness that's much more sturdier & dramatically improves voltage to the coils.


NOTE: This kit now includes Deutsch DT connectors as standard, instead of the inferior superseal connectors. The pinouts remain the same.

The 3 pin connector on the harness is used to power on the relay, the red wire is to be connected to a switched ignition 12v, and the black wire is a ground. You can find ignition 12v and ground in the connectors that power the original ignition coils, but these differ between models.


Coil Conversion Kit Contents:

  • 6 x Genuine Audi R8 Coil Packs.
  • 1 x Aluminium Coil Pack Mounting Frame.
  • 1 x Custom Ignition Wiring Harness.
  • 1 x Upgraded Multiplug w/ Connectors.
  • 3 x Hex Cap Head Bolts.
  • 3 x Spacers.

Note: This kit should only be installed by a competent person. No warranty can or will be offered for incorrect fitment, and any damage associated. Basic electrical knowledge will be required.
This is an aftermarket upgrade kit, and as such, requires some modifications to the standard car.


Additional Information:

  • The use of this product completely replaces the need to change out components for 2nd hand "like for like" parts, resulting in a much more reliable ignition solution.
  • Due to common degradation found on the existing multiplug, we've chosen to include an aftermarket multiplug, providing longer lasting connection. Due to this, some cutting and crimping of terminals is required. This service can be undertaken free of charge at our tuning centre in Essex, UK on a "while you wait" basis if you are not comfortable doing this yourself.
  • Redline Tuning have created some of the most powerful Skyline tunes / builds over the years; trust in our expertise to deliver an uncompromising coil pack solution that stands the test of time. 
  • Need more information? Contact us directly:

Contact Redline Tuning 


redline tuning logo 2

  • Please note that we do not carry stock for all Link Engine Management products. If we do not have an item in stock it will be ordered for you, please allow up to 2 extra business days for us to process your order. If you need an item urgently, or would like to know if an item is in stock, please contact us here
  • Prices shown do not include VAT, this will be calculated and added at checkout for UK customers.
  • For international customers, sales tax will not be charged at checkout. You will be responsible for the VAT equivalent wherever you live. This will be charged by the courier prior to delivery. We have zero control over these charges and they vary by the destination country. We advise that you check before ordering if you are unsure.
Shopping Basket