Penrite | HPR 10 | Full Synthetic | 10W-50 | 5L

Penrite HPR10005

( HPR10005 )

£40.79

A premium, fully synthetic SAE 10W-50 engine oil.

  Add to basket
We offer:
We offer payment cardsWe offer PayPal

Description:

HPR 10 is designed for use in modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged and turbocharged engines. It is not suitable for use in rotary engines.

HPR 10 is designed for use in vehicles that specify the use of SAE 10W-40 or SAE 10W-50 engine oils in the owner’s handbook. It can also be used where SAE 15W-40 oils are required.

HPR 10 exceeds the latest European ACEA A3/B4 and API SN/CF requirements, as well as many manufacturers’ specifications. API SN grade oils have 40% less wear, 40% less sludge and 30% less piston deposits than the previous SM grade oils. It can be used where ACEA A3/B3 is recommended and can also be used where previous API specifications SM (2004-10), SL (2001-04) and SJ are recommended.

HPR 10 is compatible with Petrol, LPG (Dual Fuel), E10, E85 (competition), Diesel (Non- DPF) and other conventional and racing fuels. If using with E85, Penrite recommend more frequent service intervals.

HPR 10 features the Penrite EXTRA TEN in the oil’s SAE rating. This technology helps protect your engine by using a normal start up viscosity with an oil that has a higher operating temperature viscosity. This improves engine oil film strength, lowering frictional heat whilst providing an extra layer of anti wear protection over standard SAE grade oils, reducing engine wear in all driving conditions.

 

Safety Data Sheet

Information Sheet

Contact Us

__

Super Dot Four Plus Brake and Clutch Fluid, with a high temperature boiling point of 600 F or 316 C
Premium synthetic oil for engine wear protection | OEM Approved and Licensed
Used to: Penetrate and loosening seized components, rusted joints or fixings.
Used to: Provide a thick barrier to seal gaps in worn engine components, reduce engine noise & burn less oil.
  • Please note that we do not carry stock for all Link Engine Management products. If we do not have an item in stock it will be ordered for you, please allow up to 2 extra business days for us to process your order. If you need an item urgently, or would like to know if an item is in stock, please contact us here
  • Prices shown do not include VAT, this will be calculated and added at checkout for UK customers.
  • For international customers, sales tax will not be charged at checkout. You will be responsible for the VAT equivalent wherever you live. This will be charged by the courier prior to delivery. We have zero control over these charges and they vary by the destination country. We advise that you check before ordering if you are unsure.
0
Shopping Basket
X