Link ECU | G4X WRXLink | WRX2X | Plug - In

Link Engine Management

( 226-4000 )

£906.00

Used for: Tuning the EJ20 engine commonly found in the Subaru WRX Version 1/2.

  Buy NOW

Link Engine Management Logo | LINK ECUS IN ESSEX

Link ECU | "G4X WRXLink WRX2X"

  • Designed for: Subaru WRX Version 1 / 2 | EJ20 Engine.
    Full list of suitable applications below.
  • The G4X WRXLink WRX2X is a Plug-In ECU developed by Link Engine Management, designed to maximise the potential of your car.
  • Link's WRX2X ECU fits directly into the factory location, requires no alteration of the factory wiring loom / harness, and is designed to be simple to install.
  • This ECU works for manual transmissions only.
  • An Air Temperature Sensor is highly recommended for use with this product.
  • WRXLink WRX2X supports the following vehicles: 10/92 - 8/96 Subaru WRX & STi | GC8A Engine | GC8B Engine | GC8C Engine.
     

Features | "G4X WRXLink WRX2X"

Expansion Connector 1:

  • GND | Ground Sensor Only
  • +5V Out | Low Current +5V Supply
  • DI 5 | Digital Input 
  • DI 6 | Digital Input
  • VOLT 5 | Analog 0-5V Input
  • VOLT 6 | Analog 0-5V Input
  • AN TEMP 3 | Temperature Sensor Input
  • AN TEMP 4 | Temperature Sensor Input

Expansion Connector 2:

  • GND | Sensor Ground Only
  • +5V OUT | Low Current +5V Supply
  • DI 9 | Digital Input
  • DI 10 | Digital Input
  • ANA Volt 8 | Analog 0-5V Input
  • ANA Volt 9 | Analog 0-5V Input
  • IGN 7 | Ignition 7 Auxiliary Output
  • IGN 8 | Ignition 8 Auxiliary Output

G4X Plug-In Features:

  • Up to 6D Fuel & Ignition Mapping
  • Precision Closed Loop Cam Control (Four Cam | Independent Control)
  • Sequential Fuel Delivery
  • Digital Triggering, all OEM Patterns
  • 5D Boost Control
  • OEM Idle Hardware Supported
  • Motorsport features; Anti-Lag, Launch Control, Flat Shift
  • Continuous Barometric Correction [on board]
  • CAN Port
  • QuickTune - Automated Fuel Tuning
  • Individual Cylinder Correction
  • USB Tuning Cable included
  • Records into On-Board memory
  • Gear Compensations for Spark, Boost and Fuel
  • More...

Full Specification [Link ECU] 


Link ECU Supply, Installation & Calibration:

  • Redline Tuning can supply, install & calibrate both the Link G4X WRXLink WRX2X ECU or any other Link Engine Management Product currently available in Essex, London and the South East of England.

Contact Redline Tuning 


Important Notes:

  • Please double check / cross reference your existing ECU's pinout with the images we have provided, to ensure connections are correct.

redline tuning logo

0
Shopping Basket
X