Link ECU | G4X AltezzaLink | TALTX | Plug - In

Link Engine Management

( 220-4000 )

£1,194.00

Used for: Tuning the 3GSE Beams engine commonly found in the Lexus IS200.

  Buy NOW

Link Engine Management Logo | LINK ECUS IN ESSEX

Link ECU | "G4X AltezzaLink TALTX"

  • Designed for: 3GSE Beams Engine.
    Full list of suitable applications below.
  • The G4X AltezzaLink TALTX is a Plug-In ECU developed by Link Engine Management, designed to maximise the potential of your car.
  • Link's TALTX fits directly into the factory enclosure, requires no alteration of the factory wiring loom / harness [for models listed], and is designed to be simple to install.
  • This ECU works for manual transmissions only.
  • On-Board 4 Bar or 7 Bar MAP Sensor included - most factory features are supported.
  • AltezzaLink TALTX Supports the following vehicles:
    Toyota Altezza (XE10) [1998 - 2001].
    Lexus IS200 (GXE10).

Features | "G4X AltezzaLink TALTX"

Inputs / Outputs:

  • GND | Sensor Ground Only
  • +5V OUT | Low Current +5V Supply
  • DI 10 | Digital Input for switching functions
  • DI 9 | Digital Input for switching functions
  • An Volt 9 | Analog 0-5V Input 
  • An Volt 8 | Analog 0-5V Input
  • AN TEMP 4 | Temperature Sensor Input
  • AUX 8 | Auxiliary Output (2.0 Amps MAX. when driving to GND 0.5 Amps MAX. when driving high)
     

G4X Plug-In Features:

  • Up to 6D Fuel & Ignition Mapping
  • Precision Closed Loop Cam Control (Four Cam | Independent Control)
  • Sequential Fuel Delivery
  • Digital Triggering, all OEM Patterns
  • 5D Boost Control w/ Three (3) Switchable Tables
  • OEM Idle Hardware Supported
  • Motorsport features; Anti-Lag, Launch Control, Flat Shift
  • Continuous Barometric Correction [on board]
  • CAN Port
  • QuickTune - Automated Fuel Tuning
  • Individual Cylinder Correction
  • USB Tuning Cable included
  • Records into On-Board memory
  • Gear Compensations for Spark, Boost and Fuel
  • More...

Full Specification [Link ECU] 


Link ECU Supply, Installation & Calibration:

  • Redline Tuning can supply, install & calibrate both the Link G4X AltezzaLink TALTX ECU or any other Link Engine Management Product currently available in Essex, London and the South East of England.

Contact Redline Tuning 


Important Notes:

  • Please double check / cross reference your existing ECU's pinout with the images we have provided, to ensure connections are correct.

redline tuning logo

0
Shopping Basket
X