Link ECU | G4X WRXLink | WRX6X | Plug - In
Link Engine Management
( 228-4000 )
£1,260.00
Used for: Tuning the EJ20 engine commonly found in the Subaru WRX Version 5/6.
Link ECU | "G4X WRXLink WRX6X"
- Designed for: Subaru WRX Version 5 / 6 | EJ20 Engine.
Full list of suitable applications below. - The G4X WRXLink WRX6X is a Plug-In ECU developed by Link Engine Management, designed to maximise the potential of your car.
- Link's WRX6X ECU fits directly into the factory location, requires no alteration of the factory wiring loom / harness, and is designed to be simple to install.
- This ECU works for manual transmissions only.
- An Air Temperature Sensor is highly recommended for use with this product.
- WRXLink WRX6X supports the following vehicles:
Subaru WRX & STi [09/1998 - 08/2000]
Subaru Impreza WRX STi Sedan Type R Version VI [GC8G]
Subaru Impreza WRX STI Coupe Type R V [GC8F]
Features | "G4X WRXLink WRX6X"
XS Connector 1:
- GND | Ground Sensor Only
- +5V Out | Low Current +5V Supply
- DI 8 | Digital Input
- DI 9 | Digital Input
- AN VOLT 8 | Analog 0-5V Input
- AN VOLT 9 | Analog 0-5V Input
- IGN 7 | Ignition 7 Auxiliary Output
- IGN 8 | Ignition 8 Auxiliary Output
Expansion Connector 2:
- GND | Sensor Ground Only
- +5V OUT | Low Current +5V Supply
- DI 5 | Digital Input
- DI 7 | Digital Input
- ANA Volt 5 | Analog 0-5V Input
- ANA Volt 6 | Analog 0-5V Input
- AN TEMP 2 | Temperature Sensor Input
- AN TEMP 3 | Temperature Sensor Input
G4X Plug-In Features:
- Up to 6D Fuel & Ignition Mapping
- Precision Closed Loop Cam Control (Four Cam | Independent Control)
- Sequential Fuel Delivery
- Digital Triggering, all OEM Patterns
- 5D Boost Control
- OEM Idle Hardware Supported
- Motorsport features; Anti-Lag, Launch Control, Flat Shift
- Continuous Barometric Correction [on board]
- CAN Port
- QuickTune - Automated Fuel Tuning
- Individual Cylinder Correction
- USB Tuning Cable included
- Records into On-Board memory
- Gear Compensations for Spark, Boost and Fuel
- More...
Link ECU Supply, Installation & Calibration:
- Redline Tuning can supply, install & calibrate both the Link G4X WRXLink WRX6X ECU or any other Link Engine Management Product currently available in Essex, London and the South East of England.
Important Notes:
- Please double check / cross reference your existing ECU's pinout with the images we have provided, to ensure connections are correct.
Link Plug in ECU - Subaru WRX Versions 5 and 6 [EJ20 Engine]
Used for: Tuning the EJ20 engine commonly found in the Subaru WRX Version 5/6.
Link ECU | "G4X WRXLink WRX6X"
- Designed for: Subaru WRX Version 5 / 6 | EJ20 Engine.
Full list of suitable applications below. - The G4X WRXLink WRX6X is a Plug-In ECU developed by Link Engine Management, designed to maximise the potential of your car.
- Link's WRX6X ECU fits directly into the factory location, requires no alteration of the factory wiring loom / harness, and is designed to be simple to install.
- This ECU works for manual transmissions only.
- An Air Temperature Sensor is highly recommended for use with this product.
- WRXLink WRX6X supports the following vehicles:
Subaru WRX & STi [09/1998 - 08/2000]
Subaru Impreza WRX STi Sedan Type R Version VI [GC8G]
Subaru Impreza WRX STI Coupe Type R V [GC8F]
Features | "G4X WRXLink WRX6X"
XS Connector 1:
- GND | Ground Sensor Only
- +5V Out | Low Current +5V Supply
- DI 8 | Digital Input
- DI 9 | Digital Input
- AN VOLT 8 | Analog 0-5V Input
- AN VOLT 9 | Analog 0-5V Input
- IGN 7 | Ignition 7 Auxiliary Output
- IGN 8 | Ignition 8 Auxiliary Output
Expansion Connector 2:
- GND | Sensor Ground Only
- +5V OUT | Low Current +5V Supply
- DI 5 | Digital Input
- DI 7 | Digital Input
- ANA Volt 5 | Analog 0-5V Input
- ANA Volt 6 | Analog 0-5V Input
- AN TEMP 2 | Temperature Sensor Input
- AN TEMP 3 | Temperature Sensor Input
G4X Plug-In Features:
- Up to 6D Fuel & Ignition Mapping
- Precision Closed Loop Cam Control (Four Cam | Independent Control)
- Sequential Fuel Delivery
- Digital Triggering, all OEM Patterns
- 5D Boost Control
- OEM Idle Hardware Supported
- Motorsport features; Anti-Lag, Launch Control, Flat Shift
- Continuous Barometric Correction [on board]
- CAN Port
- QuickTune - Automated Fuel Tuning
- Individual Cylinder Correction
- USB Tuning Cable included
- Records into On-Board memory
- Gear Compensations for Spark, Boost and Fuel
- More...
Link ECU Supply, Installation & Calibration:
- Redline Tuning can supply, install & calibrate both the Link G4X WRXLink WRX6X ECU or any other Link Engine Management Product currently available in Essex, London and the South East of England.
Important Notes:
- Please double check / cross reference your existing ECU's pinout with the images we have provided, to ensure connections are correct.
![](/shared/images/content/bus_55027/payment-logos-ecommerce-01_2.png" rel="lightbox[reason8])
