Link ECU | G4X VR4Link | VR4X | Plug - In
Link Engine Management
( 223-4000 )
£1,020.00
Used for: Tuning the 4G63T engine commonly found in the Mitsubishi Galant VR-4.
Link ECU | "G4X VR4Link VR4X"
- Designed for: Mitsubishi VR4 | 4G63T Engine.
Full list of suitable applications below. - The G4X VR4Link VR4X [with E-Throttle] is a Plug-In ECU developed by Link Engine Management, designed to maximise the potential of your car.
- Link's VR4X ECU fits directly into the factory location, requires no alteration of the factory wiring loom / harness, and is designed to be simple to install.
- This ECU works for manual transmissions only.
- This product includes an Onboard 4 bar or 7 bar MAP Sensor, and most factory features are supported. Knock Control is not available on this ECU.
- VR4Link VR4X supports the following vehicles: '87 - '92 Mitsubishi Galant VR-4 E38A [4G63T] | '87 - '92 Mitsubishi Galant VR-4 E39A [4G63T] | 1G DSM [4G63T].
Features | "G4X VR4Link VR4X"
Expansion Connector 1:
- GND | Ground Sensor Only
- +5V Out | Low Current +5V Supply
- DI 6 | Digital Input for Switching Functions
- ANA VOLT 5 | Analog 0-5V Input
- ANA VOLT 6 | Analog 0-5V Input
- AN TEMP 3 | Temperature Sensor Input
Expansion Connector 2:
- GND | Sensor Ground Only
- +5V OUT | Low Current +5V Supply
- AUX 9 | E-Throttle - can't be used as an AUX Out
- AUX 10 | Auxiliary Output
- ANA Volt 6 | Analog 0-5V Input
- ANA Volt 7 | Analog 0-5V Input
- ANA Volt 9 | Analog 0-5V Input
- ANA Volt 10 | Analog 0-5V Input
G4X Plug-In Features:
- Up to 6D Fuel & Ignition Mapping
- Precision Closed Loop Cam Control (Four Cam | Independent Control)
- Sequential Fuel Delivery
- Digital Triggering, all OEM Patterns
- 5D Boost Control
- OEM Idle Hardware Supported
- Motorsport features; Anti-Lag, Launch Control, Flat Shift
- Continuous Barometric Correction [on board]
- CAN Port
- QuickTune - Automated Fuel Tuning
- Individual Cylinder Correction
- USB Tuning Cable included
- Records into On-Board memory
- Gear Compensations for Spark, Boost and Fuel
- More...
Link ECU Supply, Installation & Calibration:
- Redline Tuning can supply, install & calibrate both the Link G4X VR4Link VR4X ECU or any other Link Engine Management Product currently available.
Important Notes:
- Please double check / cross reference your existing ECU's pinout with the images we have provided, to ensure connections are correct.
Link Plug in ECU - Mitsubishi Galant VR4 - 4G63T Engine.
Used for: Tuning the 4G63T engine commonly found in the Mitsubishi Galant VR-4.
Link ECU | "G4X VR4Link VR4X"
- Designed for: Mitsubishi VR4 | 4G63T Engine.
Full list of suitable applications below. - The G4X VR4Link VR4X [with E-Throttle] is a Plug-In ECU developed by Link Engine Management, designed to maximise the potential of your car.
- Link's VR4X ECU fits directly into the factory location, requires no alteration of the factory wiring loom / harness, and is designed to be simple to install.
- This ECU works for manual transmissions only.
- This product includes an Onboard 4 bar or 7 bar MAP Sensor, and most factory features are supported. Knock Control is not available on this ECU.
- VR4Link VR4X supports the following vehicles: '87 - '92 Mitsubishi Galant VR-4 E38A [4G63T] | '87 - '92 Mitsubishi Galant VR-4 E39A [4G63T] | 1G DSM [4G63T].
Features | "G4X VR4Link VR4X"
Expansion Connector 1:
- GND | Ground Sensor Only
- +5V Out | Low Current +5V Supply
- DI 6 | Digital Input for Switching Functions
- ANA VOLT 5 | Analog 0-5V Input
- ANA VOLT 6 | Analog 0-5V Input
- AN TEMP 3 | Temperature Sensor Input
Expansion Connector 2:
- GND | Sensor Ground Only
- +5V OUT | Low Current +5V Supply
- AUX 9 | E-Throttle - can't be used as an AUX Out
- AUX 10 | Auxiliary Output
- ANA Volt 6 | Analog 0-5V Input
- ANA Volt 7 | Analog 0-5V Input
- ANA Volt 9 | Analog 0-5V Input
- ANA Volt 10 | Analog 0-5V Input
G4X Plug-In Features:
- Up to 6D Fuel & Ignition Mapping
- Precision Closed Loop Cam Control (Four Cam | Independent Control)
- Sequential Fuel Delivery
- Digital Triggering, all OEM Patterns
- 5D Boost Control
- OEM Idle Hardware Supported
- Motorsport features; Anti-Lag, Launch Control, Flat Shift
- Continuous Barometric Correction [on board]
- CAN Port
- QuickTune - Automated Fuel Tuning
- Individual Cylinder Correction
- USB Tuning Cable included
- Records into On-Board memory
- Gear Compensations for Spark, Boost and Fuel
- More...
Link ECU Supply, Installation & Calibration:
- Redline Tuning can supply, install & calibrate both the Link G4X VR4Link VR4X ECU or any other Link Engine Management Product currently available.
Important Notes:
- Please double check / cross reference your existing ECU's pinout with the images we have provided, to ensure connections are correct.
![](/shared/images/content/bus_55027/payment-logos-ecommerce-01_2.png" rel="lightbox[reason8])
