Link ECU | G4X S15Link | NS15X | Plug - In

Link Engine Management

( 217-4000 )

£1,530.00

Used for: Tuning the SR20 engine commonly found in the Nissan Silvia S13/14a/15 | Pulsar GTi-R.

  Buy NOW

Link Engine Management Logo | LINK ECUS IN ESSEX

Link ECU | "G4X S15Link NS15X"

  • Designed for: Nissan SR20 Engine [64 Pin / Blue Header Plug].
    Full list of suitable applications below.
  • The G4X S15Link NS15X is a Plug-In ECU developed by Link Engine Management, designed to maximise the potential of your car.
  • Link's NS15X ECU fits directly into the factory location / enclosure, requires no alteration of the factory wiring loom / harness, and is designed to be simple to install.
  • This ECU works for manual transmissions only.
  • Most factory features are supported, however and this ECU includes an onboard 4 Bar MAP or 7 Bar MAP Sensor.
  • S15Link NS15X supports the following vehicles: 
    Nissan S13 Silvia / 180SX SR20DET (NOT CA18DET)
    Nissan S14A Silvia (Facelift) SR20DET
    Nissan S15 Silvia SR20DET
    Nissan S15 Silvia SR20DE
    Nissan Pulsar GTi-R RNN14 - SR20DET
    Nissan Pulsar N15 SR16VE
    Nissan Pulsar N14 Distributed

     

Features | "G4X S15Link NS15X"

Expansion Connector 1:

  • GND | Ground Sensor Only
  • +5V OUT | Low Current +5V Supply
  • DI 6 | Digital Input
  • DI 7 | Digital Input
  • AN VOLT 5 | Analog 0-5V Input
  • AN VOLT 6 | Analog 0-5V Input
  • AN TEMP 3 | Temperature Sensor Input
  • AN TEMP 4  | Temperature Sensor Input

Expansion Connector 2:

  • IGN 5 | Ignition 5 Auxiliary Output
  • IGN 6 | Ignition 6 Auxiliary Output
  • IGN 7 | Ignition 7 Auxiliary Output
  • DI 8 | Digital Input 
  • AN VOLT 8 | Analog 0-5V Input
  • AN VOLT 9 | Analog 0-5V Input
  • AN VOLT 10 | Analog 0-5V Input
  • AN VOLT 11 | Analog 0-5V Input

G4X Plug-In Features:

  • Up to 6D Fuel & Ignition Mapping
  • Precision Closed Loop Cam Control (Four Cam | Independent Control)
  • Sequential Fuel Delivery
  • Digital Triggering, all OEM Patterns
  • 5D Boost Control
  • OEM Idle Hardware Supported
  • Motorsport features; Anti-Lag, Launch Control, Flat Shift
  • Continuous Barometric Correction [on board]
  • CAN Port
  • QuickTune - Automated Fuel Tuning
  • Individual Cylinder Correction
  • USB Tuning Cable included
  • Records into On-Board memory
  • Gear Compensations for Spark, Boost and Fuel
  • More...

Full Specification [Link ECU] 


Link ECU Supply, Installation & Calibration:

  • Redline Tuning can supply, install & calibrate both the Link G4X S15Link NS15X ECU or any other Link Engine Management Product currently available in Essex, London and the South East of England.

Contact Redline Tuning 


Important Notes:

  • Please double check / cross reference your existing ECU's pinout with the images we have provided, to ensure connections are correct.

redline tuning logo

0
Shopping Basket
X