Link ECU | G4X MiniLink | R53 | Plug - In

Link Engine Management

( 209-4000 )

£1,368.00

Used for: Tuning the Tritec 1.6L SC engine commonly found in the R50-R53 MINI Hatch.

  Buy NOW

Link Engine Management Logo | LINK ECUS IN ESSEX

Link ECU | "G4X MINILINK R53"

  • Designed for: R50-R53 Tritec 1.6L SC | R50-R53 MINI Hatch [1.6L].
  • The G4X MINILink is a Plug-In ECU developed by Link Engine Management, designed to maximise the potential of your car.
  • Link's BMW Mini ECU comes in it's own case, fits directly into the factory location, requires no alteration of the factory wiring loom / harness, and is designed to be simple to install.
  • This ECU works for manual transmissions only, and an XS Loom and 4 Bar Map Sensor is highly recommended [sold separately].

Features | "G4X MINILink R53"

Inputs:

  • DI8 | Digital Input
  • DI9 | Digital Input
  • An Temp 3 | Temperature Sensor Input
  • An Temp 4 | Temperature Sensor Input
  • An Volt 10 | Analog 0-5V Input
  • An Volt 11 | Analog 0-5V Input 

Outputs:

  • AUX1 | Auxiliary Output
  • +5V Out | Low Current +5V Power Supply
  • GND | Sensor Ground Only

G4X Plug-In Features:

  • Up to 6D Fuel & Ignition Mapping
  • Precision Closed Loop Cam Control (Four Cam | Independent Control)
  • Sequential Fuel Delivery
  • Digital Triggering, all OEM Patterns
  • 5D Boost Control
  • OEM Idle Hardware Supported
  • Motorsport features; Anti-Lag, Launch Control, Flat Shift
  • Continuous Barometric Correction [on board]
  • CAN Port
  • QuickTune - Automated Fuel Tuning
  • Individual Cylinder Correction
  • USB Tuning Cable included
  • Records into On-Board memory
  • Gear Compensations for Spark, Boost and Fuel
  • More...

Full Specification [Link ECU] 


Link ECU Supply, Installation & Calibration:

  • Redline Tuning can supply, install & calibrate both the Link G4X MINILink R53 ECU or any other Link Engine Management Product currently available in Essex, London and the South East of England.

Contact Redline Tuning 


Important Notes:

  • Please double check / cross reference your existing ECU's pinout with the images we have provided, to ensure connections are correct.

redline tuning logo

0
Shopping Basket
X