Link ECU | G4X CIVICLink | HC92x | Plug - In

Link Engine Management

( 205-4000 )

£906.00

Used for: Tuning the B16 & B18 engine commonly found in the Gen. 5 Honda Civic.

  Buy NOW

Link Engine Management Logo | LINK ECUS IN ESSEX

Link ECU | "G4X CIVICLink HC92X"

  • Designed for: 1992/93/94/95 Honda B16 & B18 Engine [OBD1 ECU].
    Full list of suitable applications below.
  • The G4X CIVICLink HC92X is a Plug-In ECU developed by Link Engine Management, designed to maximise the potential of your car.
  • Link's Honda Civic ECU fits directly into the factory enclosure, requires no alteration of the factory wiring loom / harness [for models listed], and is designed to be simple to install.
  • This ECU works for manual transmissions only.
  • On-Board MAP Sensor & Knock Control is not available on this ECU.
  • CIVICLink HC92X Supports the following vehicles: '92 - '95 Gen. 5 Honda Civic [DX/LX/EX/Si] | '92 - '95 Acura Integra [RS/LS/GS/GS-R] | '90 - '95 Honda Accord [DX/LX/EX] | '93 - '95 Honda Del Sol [S/SI] | '94 - '95 Honda Del Sol [VTEC] | '90 - '91 Honda Prelude [SI] | '92 - '95 Honda Prelude [S/SE/Si/VTEC].

Features | "G4X CIVICLink HC92X"

Inputs:

  • DI6 | Digital Input
  • An Temp 3 | Temperature Sensor Input
  • An Volt 4 | Analog 0-5V Input
  • An Volt 5 | Analog 0-5V Input
  • An Volt 6 | Analog 0-5V Input 

Outputs:

  • AUX8 | Auxiliary Output [0.5A Current Maximum]
  • +5V Out | Low Current +5V Power Supply
  • GND | Sensor Ground Only

G4X Plug-In Features:

  • Up to 6D Fuel & Ignition Mapping
  • Precision Closed Loop Cam Control (Four Cam | Independent Control)
  • Sequential Fuel Delivery
  • Digital Triggering, all OEM Patterns
  • 5D Boost Control w/ Three (3) Switchable Tables
  • OEM Idle Hardware Supported
  • Motorsport features; Anti-Lag, Launch Control, Flat Shift
  • Continuous Barometric Correction [on board]
  • CAN Port
  • QuickTune - Automated Fuel Tuning
  • Individual Cylinder Correction
  • USB Tuning Cable included
  • Records into On-Board memory
  • Gear Compensations for Spark, Boost and Fuel
  • More...

Full Specification [Link ECU] 


Link ECU Supply, Installation & Calibration:

  • Redline Tuning can supply, install & calibrate both the Link G4X CIVICLink HC92X ECU or any other Link Engine Management Product currently available in Essex, London and the South East of England.

Contact Redline Tuning 


Important Notes:

  • Please double check / cross reference your existing ECU's pinout with the images we have provided, to ensure connections are correct.

redline tuning logo

0
Shopping Basket
X