Link ECU | G4X EVOLink | EVO3X | Plug - In
Link Engine Management
( 202-4000 )
£1,020.00
Used for: Tuning the 4G63 engine commonly found in the Mitsubishi EVO i-iii.
Link ECU | "G4X EVOLink EVO3X"
- Designed for: Mitsubishi EVO 1 - 3 | 4G63 Engine.
Full list of suitable applications below. - The G4X EVOLink EVO3X is a Plug-In ECU developed by Link Engine Management, designed to maximise the potential of your car.
- Link's EVO3X ECU fits directly into the factory location, requires no alteration of the factory wiring loom / harness, and is designed to be simple to install.
- This ECU works for manual transmissions only.
- This product includes an Onboard 4 bar MAP Sensor, and most factory features are supported. Air Temperature Sensor highly recommended.
- EVOLink EVO3X supports the following vehicles: '92 - '94 Mitsubishi EVO 1* | '94 - 95 Mitsubishi EVO 2* | '95 - '96 Mitsubishi EVO 3* | Mitsubishi GSR 1.8L 4G62
(*Chassis number for these cars should be CD9A | CE98).
Features | "G4X EVOLink EVO3X"
Expansion Connector 1:
- GND | Ground Sensor Only
- +5V | Low Current +5V Supply
- DI 9 | Digital Input
- DI 8 | Digital Input
- Volt 5 | Analog 0-5V Input
- Volt 6 | Analog 0-5V Input
- Temp 3 | Temperature Sensor Input
- Temp 4 | Temperature Sensor Input
Expansion Connector 2:
- IGN 5 | Ignition 5 Auxiliary Input
- IGN 6 | Ignition 6 Auxiliary Input
- IGN 7 | Ignition 7 Auxiliary Input
- IGN 8 | Ignition 8 Auxiliary Input
- Volt 8 | Analog 0-5V Input
- Volt 9 | Analog 0-5V Input
- Volt 10 | Analog 0-5V Input
- Volt 11 | Analog 0-5V Input
G4X Plug-In Features:
- Up to 6D Fuel & Ignition Mapping
- Precision Closed Loop Cam Control (Four Cam | Independent Control)
- Sequential Fuel Delivery
- Digital Triggering, all OEM Patterns
- 5D Boost Control
- OEM Idle Hardware Supported
- Motorsport features; Anti-Lag, Launch Control, Flat Shift
- Continuous Barometric Correction [on board]
- CAN Port
- QuickTune - Automated Fuel Tuning
- Individual Cylinder Correction
- USB Tuning Cable included
- Records into On-Board memory
- Gear Compensations for Spark, Boost and Fuel
- More...
Link ECU Supply, Installation & Calibration:
- Redline Tuning can supply, install & calibrate both the Link G4X EVOLink EVO3X ECU or any other Link Engine Management Product currently available in Essex, London and the South East of England.
Important Notes:
- Please double check / cross reference your existing ECU's pinout with the images we have provided, to ensure connections are correct.
Link Plug in ECU - Mitsubishi EVO 1, 2 & 3 (EVO3X) - 4G63 Engine
Used for: Tuning the 4G63 engine commonly found in the Mitsubishi EVO i-iii.
Link ECU | "G4X EVOLink EVO3X"
- Designed for: Mitsubishi EVO 1 - 3 | 4G63 Engine.
Full list of suitable applications below. - The G4X EVOLink EVO3X is a Plug-In ECU developed by Link Engine Management, designed to maximise the potential of your car.
- Link's EVO3X ECU fits directly into the factory location, requires no alteration of the factory wiring loom / harness, and is designed to be simple to install.
- This ECU works for manual transmissions only.
- This product includes an Onboard 4 bar MAP Sensor, and most factory features are supported. Air Temperature Sensor highly recommended.
- EVOLink EVO3X supports the following vehicles: '92 - '94 Mitsubishi EVO 1* | '94 - 95 Mitsubishi EVO 2* | '95 - '96 Mitsubishi EVO 3* | Mitsubishi GSR 1.8L 4G62
(*Chassis number for these cars should be CD9A | CE98).
Features | "G4X EVOLink EVO3X"
Expansion Connector 1:
- GND | Ground Sensor Only
- +5V | Low Current +5V Supply
- DI 9 | Digital Input
- DI 8 | Digital Input
- Volt 5 | Analog 0-5V Input
- Volt 6 | Analog 0-5V Input
- Temp 3 | Temperature Sensor Input
- Temp 4 | Temperature Sensor Input
Expansion Connector 2:
- IGN 5 | Ignition 5 Auxiliary Input
- IGN 6 | Ignition 6 Auxiliary Input
- IGN 7 | Ignition 7 Auxiliary Input
- IGN 8 | Ignition 8 Auxiliary Input
- Volt 8 | Analog 0-5V Input
- Volt 9 | Analog 0-5V Input
- Volt 10 | Analog 0-5V Input
- Volt 11 | Analog 0-5V Input
G4X Plug-In Features:
- Up to 6D Fuel & Ignition Mapping
- Precision Closed Loop Cam Control (Four Cam | Independent Control)
- Sequential Fuel Delivery
- Digital Triggering, all OEM Patterns
- 5D Boost Control
- OEM Idle Hardware Supported
- Motorsport features; Anti-Lag, Launch Control, Flat Shift
- Continuous Barometric Correction [on board]
- CAN Port
- QuickTune - Automated Fuel Tuning
- Individual Cylinder Correction
- USB Tuning Cable included
- Records into On-Board memory
- Gear Compensations for Spark, Boost and Fuel
- More...
Link ECU Supply, Installation & Calibration:
- Redline Tuning can supply, install & calibrate both the Link G4X EVOLink EVO3X ECU or any other Link Engine Management Product currently available in Essex, London and the South East of England.
Important Notes:
- Please double check / cross reference your existing ECU's pinout with the images we have provided, to ensure connections are correct.
![](/shared/images/content/bus_55027/payment-logos-ecommerce-01_2.png" rel="lightbox[reason8])
