Link ECU | G4X EVOLink | EVO9X | Plug - In

Link Engine Management

( 204-4000 )

£1,530.00

Used for: Tuning the 4G63 engine commonly found in the Mitsubishi EVO 9 [ix].

  Buy NOW

Link Engine Management Logo | LINK ECUS IN ESSEX

Link ECU | "G4X EVOLink EVO9X"

  • Designed for: Mitsubishi EVO 9 | 4G63 Engine.
    Full list of suitable applications below.
  • The G4X EVOLink EVO9X [with E-Throttle] is a Plug-In ECU developed by Link Engine Management, designed to maximise the potential of your car.
  • Link's EVO9X ECU fits directly into the factory location, requires no alteration of the factory wiring loom / harness, and is designed to be simple to install.
  • This ECU works for manual transmissions only.
  • This product includes an Onboard 7 bar MAP Sensor, and most factory features are supported.
  • EVOLink EVO9X supports the following vehicles: '05 - '07 CT9A Mitsubishi Lancer EVO 9 | '03 - '05 CT9A Mitsubishi Lancer EVO 8 [3 Plug Only].

    Any EVO8 Car with a 3 Plug ECU will also require this ECU.

     

Features | "G4X EVOLink EVO9X"

Expansion Connector 1:

  • GND | Ground Sensor Only
  • +5V Out | Low Current +5V Supply
  • DI 9 | Digital Input 
  • DI 10 | Digital Input
  • AUX 11 | Auxiliary Output
  • ANA VOLT 11 | Analog 0-5V Input
  • ANA VOLT 8 | Analog 0-5V Input
  • AN TEMP 4 | Temperature Sensor Input

Expansion Connector 2:

  • GND | Sensor Ground Only
  • +5V OUT | Low Current +5V Supply
  • AUX 9 | E-Throttle - can't be used as an AUX Out
  • AUX 10 | Auxiliary Output
  • ANA Volt 6 | Analog 0-5V Input
  • ANA Volt 7 | Analog 0-5V Input
  • ANA Volt 9 | Analog 0-5V Input
  • ANA Volt 10 | Analog 0-5V Input

G4X Plug-In Features:

  • Up to 6D Fuel & Ignition Mapping
  • Precision Closed Loop Cam Control (Four Cam | Independent Control)
  • Sequential Fuel Delivery
  • Digital Triggering, all OEM Patterns
  • 5D Boost Control
  • OEM Idle Hardware Supported
  • Motorsport features; Anti-Lag, Launch Control, Flat Shift
  • Continuous Barometric Correction [on board]
  • CAN Port
  • QuickTune - Automated Fuel Tuning
  • Individual Cylinder Correction
  • USB Tuning Cable included
  • Records into On-Board memory
  • Gear Compensations for Spark, Boost and Fuel
  • More...

Full Specification [Link ECU] 


Link ECU Supply, Installation & Calibration:

  • Redline Tuning can supply, install & calibrate both the Link G4X EVOLink EVO9X ECU or any other Link Engine Management Product currently available in Essex, London and the South East of England.

Contact Redline Tuning 


Important Notes:

  • Please double check / cross reference your existing ECU's pinout with the images we have provided, to ensure connections are correct.

redline tuning logo

0
Shopping Basket
X