Link ECU | G4X EVOLink | EVO8X | Plug - In

Link Engine Management

( 203-4000 )

£1,530.00

Used for: Tuning the 4G63 engine commonly found in the Mitsubishi EVO vi-viii.

  Buy NOW

Link Engine Management Logo | LINK ECUS IN ESSEX

Link ECU | "G4X EVOLink EVO8X"

  • Designed for: Mitsubishi EVO 4 - 8 | 4G63 Engine.
    Full list of suitable applications below.
  • The G4X EVOLink EVO8X [with E-Throttle] is a Plug-In ECU developed by Link Engine Management, designed to maximise the potential of your car.
  • Link's EVO8X ECU fits directly into the factory location, requires no alteration of the factory wiring loom / harness, and is designed to be simple to install.
  • This ECU works for manual transmissions only.
  • This product includes an Onboard 4 bar or 7 bar MAP Sensor, and most factory features are supported.
  • EVOLink EVO8X supports the following vehicles: CN9A Mitsubishi Lancer EVO 4 | CP9A Mitsubishi Lancer EVO 5 / 6 / 6.5 TME | CT9A Mitsubishi Lancer EVO 7 | CT9A Mitsubishi Lancer EVO 8* (Models with 4-Plug ECU).

    *Some EVO 8's have a 3 Plug ECU; these applications will need the EVO9X Link ECU.

     

Features | "G4X EVOLink EVO8X"

Expansion Connector 1:

  • GND | Ground Sensor Only
  • +5V Out | Low Current +5V Supply
  • DI 7 | Digital Input 
  • DI 8 | Digital Input
  • DI 9 | Digital Input
  • AUX 4 | Auxiliary Input
  • IGN 7 | Ignition 7 Auxiliary Input
  • IGN 8 | Ignition 8 Auxiliary Input

Expansion Connector 2:

  • GND | Sensor Ground Only
  • +5V OUT | Low Current +5V Supply
  • AUX 9 | E-Throttle - can't be used as an AUX Out
  • AUX 10 | Auxiliary Output
  • ANA Volt 6 | Analog 0-5V Input
  • ANA Volt 7 | Analog 0-5V Input
  • ANA Volt 9 | Analog 0-5V Input
  • ANA Volt 10 | Analog 0-5V Input

G4X Plug-In Features:

  • Up to 6D Fuel & Ignition Mapping
  • Precision Closed Loop Cam Control (Four Cam | Independent Control)
  • Sequential Fuel Delivery
  • Digital Triggering, all OEM Patterns
  • 5D Boost Control
  • OEM Idle Hardware Supported
  • Motorsport features; Anti-Lag, Launch Control, Flat Shift
  • Continuous Barometric Correction [on board]
  • CAN Port
  • QuickTune - Automated Fuel Tuning
  • Individual Cylinder Correction
  • USB Tuning Cable included
  • Records into On-Board memory
  • Gear Compensations for Spark, Boost and Fuel
  • More...

Full Specification [Link ECU] 


Link ECU Supply, Installation & Calibration:

  • Redline Tuning can supply, install & calibrate both the Link G4X EVOLink EVO8X ECU or any other Link Engine Management Product currently available in Essex, London and the South East of England.

Contact Redline Tuning 


Important Notes:

  • Please double check / cross reference your existing ECU's pinout with the images we have provided, to ensure connections are correct.

redline tuning logo

0
Shopping Basket
X